home page

news

glossary of terms

data for the requests

stabilisers - guide

where we are

contact us

-------

PRODUCTS SUMMARY

single phase transformers 

control

ITAlia (50-3000VA)

EUR multitap (50-3000VA)

ET (50-3000VA)

TOR-toroidal (20VA-5kVA)

MC (4000-20000VA)

isolation and safety

TEcna (50-2000VA)

GT (50-2000VA) UL APPROVED

ALI (50-1000VA) LIGHTING 12V

TMIB for medical devices (0.3:2kVA)

TMIC (3000-25000VA)

TMI64 (3000-25000VA-medical)

specific use

ALX 200-500VA) ip55 class II

AL (50-1500VA) HALOGEN LAMPS

three phase transformers

power

TTP (1-100kVA)

isolation and safety

TTI (1-40kVA)
TTI-K NON LINEAR LOADS (15-300kVA)

autotransfomers

SB 110/220V reversible

ATM (single ph. 0,1-5kVA)

KVA (three ph. 1-500kVA)

ATTP (three ph. 1-300kVA)

ATTP1 (three ph. +box 1-300kVA)

ATV (motor starting  7-220kW)

---------

metal enclosures

--------

voltage stabilisers

AVR voltage regulators

SEN single ph. electronic 

SED single ph. electronic

RA 1ph. servo motor 0,5-3kVA

Line conditioners for HI-FI 1.5-2.5k

RB single ph. electromechanical

R25 single ph. ±25% input

RTC three ph. electromechanical

RTC 220V three ph. NO NEUTRAL

RTI three ph.line conditioners

RTG three ph. electromechanical

uninterruptible power supplies

EB Unin.power supplies (UPS) to 2kVA

ECL sine wave ups to 3kVA

GET sine wave on-line ups to 10kVA

other products

frequency converters 60-50Hz
UP TO 9A

frequency converters 60-50Hz
FROM 20A TO 65A

GMM frequency converters 60-50Hz
FROM 3kVA TO 15kVA

Hospital earth leakage control

230V-110V ADAPTERS

Motor Guard (motor protection)

versione italiana

go to our UK Web site:
www.ideomat.co.uk

copyright 2001-2004 by:

web factory

   

SINGLE PHASE ELECTRONIC VOLTAGE STABILISER SEB range

POWER INPUT OUTPUT FREQUENCY SPEED ACCURACY
FROM 3KVA TO 10KVA 230V ± 15% 230V 50/60 Hz 2 mSEC/V ± 3%

SEB series stabilisers are the natural development of the SEN series. While maintaining the superior performance characteristic of the SEN series, the solidity and reliability have been upgraded thus enabling these stabilisers to handle considerable power levels. For variations from 195V to 264V SEB provides a stabilised output with an accuracy of ±3% without any moving part subject to wear with a very high speed covering the entire range in a few hundredths of a second.
No voltage fluctuation, however sudden, may reach the user apparatus which is thus always protected.
SEB is equipped with an automatic circuit breaker, analogic voltmeter with input and output voltage reading, power supply led. 60Hz models are available. Upon request, we supply the mains conditioner equipped with isolation transformer and input/output filters in the SEBI version.

 Power  from 3kVA to 10kVA
 Input voltage  230V
 Input voltage acceptable variation  ± 15% (from 195V to 264V)
 Output voltage  230V
 Output voltage accuracy  ± 3%
 Frequency  50Hz (50/60 Hz SEB07K-SEB10K)
 Regulation speed  2/1000 sec. / Volt
 Load tolerable variation  0 - 100%
 Acceptable power factor  0 - 1
 Full load efficiency  > 98%
 Harmonic distortion  < 0,5%
 Ambient temperature  0° : 45°C
 Altidude  up to 1000m. without derating
 Standards  IEC 686
 Protections  Automatic circuit breaker
 Standard accessories  automatic circuit breaker, analog voltmeter
 in/out connectors on the rear side
power part no. dimensions mm. SCH weight
VA A B C kg.
3000 SED03K 230 460 220 A 16.0
4000 SED04K 230 460 220 A 17.5
5000 SED05K 230 460 220 A 22.0
7500 SED07K 340 460 220 B 27.0
10000 SED10K 340 460 220 B 31.0

A

B

ON REQUEST WE SUPPLY SED STABILISERS WITH DIFFERENT RATED VOLTAGE AND FREQUENCY: 110V,200V,220V,240V,380V,400V,440V AND OTHERS ON REQUEST

ON REQUEST WE SUPPLY SED STABILISERS WITH DIFFERENT ACCESSORIES, LIKE PLUGS AND SOCKETS TO MOST INTERNATIONAL STANDARDS, INCREASED FILTERS AND PROTECTIONS, DIGITAL VOLTMETER ON FRONT PANEL

DONWLOAD INSTRUCTION MANUAL

HOME PAGE  -  VERSIONE ITALIANA  -  CREDITS  -  COPYRIGHT - E-MAIL

Data shown on this page are for reference only and can be changed withouth further notice